How to remove your pin and other sign-in options from windows 10

Windows Hello is one of the sign-in options available on Windows 11 and Windows 10 systems. It is a more secure way for users to access their Windows 11/10 devices via a PIN, Fingerprint Recognition, and Facial Recognition. You can easily set up and remove Windows Hello PIN and other sign-in options from Settings. Some users have reported that they were unable to remove Windows Hello PIN from Settings because the Windows Hello PIN Remove button was greyed out. If you experience the same issue on your device, this post may help you fix it.

Windows Hello PIN Remove button is greyed out

Here, we will explain the following two solutions to fix this issue:

1. Disabling the “Only allow Windows Hello sign-in” option.
2. Using the Forgot PIN option.

Below, we have described these methods in detail.

1] Disabling the “Only allow Windows Hello sign-in” option

If the Windows Hello PIN Remove button is greyed out on your system, the first thing that you can do is, disable the “only allow Windows Hello sign-in” option from Settings. After setting up a Windows Hello PIN, you cannot remove it until this option is enabled.

The following steps are for Windows 11 users:

1. Launch the Settings app by pressing Win + I keys.
2. Select Accounts from the left side.
3. Click on the Sign-in options on the right pane.
4. Now, check if the button next to the “For improved security, only allow Windows Hello sign-in for Microsoft accounts on this device (Recommended)” option is on or off. You will find this option in the Additional Settings.
5. If the button is turned on, turn it off.

This will enable the Windows Hello PIN Remove button. Now, you can easily delete the Windows Hello PIN.

Windows 10 users have to go through the following steps:

1. Right-click on the Start Menu and select Settings.
2. Click Accounts.
3. Select Sign-in options from the left pane.
4. On the Sign-in options page, turn off the button that says “For improved security, only allow Windows Hello sign-in for Microsoft accounts on this device (Recommended).”

This will enable the greyed-out Windows Hello PIN Remove button.

2] Using the Forgot PIN option

Some users have reported that they did not find the “only allow Windows Hello sign-in” option in Windows 11/10 Settings. If this is the case with you, you can delete the Windows Hello key from your computer by this method. Before you proceed, we recommend you add another sign-in option to your computer, like a password. This will help you log into Windows 11/10 without creating a new Windows Hello PIN.

Open the Sign-in options page on your Windows 11/10 system by following the steps described above. After that, follow the instructions listed below:

1. On the Sign-in options page, expand the PIN (Windows Hello) tab, and click on the I Forgot my PIN link. After that, you will be prompted to reset your Windows Hello PIN. Click Continue.
2. Now, Windows will ask you to confirm your identity by entering your Microsoft account password. After entering the password, you will be prompted to set up a new PIN.
3. You need not set up a new PIN. Simply click Cancel and close the PIN reset window. This will delete your existing Windows Hello PIN from your computer.

When you start your computer the next time after deleting the Windows Hello PIN, you may see the following message on the login screen:

Something happened and your PIN isn’t available. Click to set up your PIN again.

Along with this message, you will see two more options, Set up my PIN and Sign-in options. The latter option will appear only if you have set up another sign-in option, like a password. Click Sign-in options and enter your password to log into your administrative or local account on Windows 11/10.

After this, Windows will never ask you to set up a PIN on the login screen until you click Sign-in options on the login screen again. Now, you will be able to sign in to Windows 11/10 by entering your password.

How do I remove Windows Hello PIN?

You can remove Windows Hello PIN simply by clicking on the Remove button. If the Remove button is greyed out, you can try any of the two methods described above in this article.

How do I disable the Hello PIN in Windows 11/10?

To disable the Windows Hello PIN on a Windows 11/10 system, you have to remove it from Settings. If you want to permanently disable the Windows Hello PIN, you have to use Windows Registry Editor or Local Group Policy Editor.

Kevin Parrish has been writing online since the mid-1990s. For a decade, he wrote reviews, previews, news, and more covering PC and console gaming. In 2008, he began covering hardware and devices after Tom’s Hardware closed its dedicated gaming website. He’s published news, reviews, how-to guides, and op-ed pieces on websites like Digital Trends, Android Authority, Tom’s Hardware, Tom’s Guide, and Maximum PC. Read more.

Windows 10 boasts a suite of security features to keep your PC safe. But what if you need to remove a password or security key? This guide shows how to remove your PIN and other sign-in options from Windows 10.

This guide tackles PINs, face recognition, fingerprint scans, and security keys. Because you cannot delete a password, this guide also walks you through deleting your account from a Windows 10 PC. You can always create another account that doesn’t have an associated password.

Remove a PIN, Face, or Finger

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Sign-In Options” entry on the menu followed by “Windows Hello PIN” listed on the right. This entry expands to reveal a “Remove” button. Click it once.

Windows 10 presents a warning. Click the “Remove” button again to confirm.

The steps to remove your face and finger are nearly identical to removing a PIN. Simply choose “Window Hello Face” or “Windows Hello Finger” instead and then follow the above removal steps.

Remove a Security Key

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Sign-In Options” entry on the menu followed by “Security Key” listed on the right. This entry expands to reveal a “Manage” button. Click it once.

Insert your Security Key into an open USB port as prompted and touch the key’s flashing icon. Once Windows 10 verifies the key, click the “Reset” button followed by the “Close” button.

Remove Your Account (Administrator)

If you’re trying to remove the sole account from a PC you own, you can’t simply delete it. Instead, you must create a local user account, set it as administrator, log into that account, and then delete your original account. The alternative is to reset the PC.

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Family & Other Users” entry on the menu followed by the “+” button next to “Add Someone Else to This PC” listed under “Other Users” on the right.

Click the “I Don’t Have This Person’s Sign-In Information” link in the following window.

Click the “Add a User without a Microsoft Account” option.

Enter a username, password (twice), establish three security questions, and then click the “Next” button.

You can create an account without a password, but this will serve as an administrative account, so not establishing a password is a bad idea unless you’re selling or giving the PC to another individual. Even then, a full reset is the better option.

When complete, you’ll see the new local account listed under “Other Users.” Select the new account and click the “Change Account Type” button.

In the “Change Account Type” pop-up box, select “Administrator” in the drop-down menu and click the “OK” button.

Next, click the Windows button, click on your profile icon, and select the new account in a pop-up menu to log in to Windows 10 using that account.

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Family & Other Users” entry on the menu. Select your account on the right listed under “Other Users” to expand its options. Click the “Remove” button.

Have a PIN set but getting tired of it? Removing it is easy

• Wichita Technical Institute

• Tweet
• Share
• Email

• Tweet
• Share
• Email

What to Know

• Be sure you’ve signed in to the account you want to remove the PIN from before you begin.
• Go to Start Menu >Settings >Accounts >Sign-in options >Windows Hello PIN >Remove. Make sure to confirm your selection.
• Once the PIN is gone, consider protecting your account by other means, like a password.

This article covers how to remove a PIN in Windows 10. In Windows 10, PINs are an optional way to sign in, much like a password, alongside other options like Fingerprint sign-in and the Windows Face ID sign-in system.

If you have kids, roommates, or a work device, it’s usually best to keep a lock on your user account, but if it’s just you at home, how you sign in likely doesn’t matter. So, if convenience is a priority, you can go without a password and not be at risk.

How Do I Disable the PIN in Windows 10?

Much like setting a PIN in Windows, removing one takes only a few clicks and a couple of seconds. Make sure you’ve signed in to the account you want to remove the PIN from before you begin.

Open up the Start menu, and click Settings.

Navigate to Accounts.

Within the newly opened window, select Sign-in options on the left side.

Select Windows Hello PIN, and then click Remove.

Microsoft will ask you to confirm you want to remove your PIN, so click Remove once more, and then your PIN will be gone.

If you signed in to Windows with your Microsoft account, you’ll need to enter your Microsoft account password to remove your PIN after confirming.

Windows 10 Pin Tips and Tricks

If you change your mind and want a PIN again, in the same place where you click Remove, you’ll now find you can select Add, which works the same way: Set your PIN, confirm, and once again, when you sign in, you’ll be prompted for a PIN.

The Sign-in options page also allows you to sign in to your device in a variety of other ways, including a traditional password. From this window, you can easily adjust all your sign-in needs.

If you sign in with a Microsoft account, however, you will not be able to change your Microsoft password here. Any sign-in method you choose, even if you linked your computer to your Microsoft account, will apply only to your computer and not your Microsoft account.

If the Windows Hello Pin section is unavailable, make sure you’ve logged in to the correct account. Also, from Settings > Accounts > Sign-in options, ensure that the slider next to Require Windows Hello sign-in for Microsoft accounts is set to the off position.

Use the above instructions to disable your pin. To remove your Windows 10 password as well, sign in to your local account and access your password from Settings > User Accounts > Sign-in options > Change. When you see prompts to enter your old and new password, leave the fields empty and select Finish. You can also go password-free by using a different Windows Hello sign-in method and turning on Require Windows Hello sign-in for Microsoft accounts from the Sign-in options area.

Windows 10 boasts a suite of security features to keep your PC safe. But what if you need to remove a password or security key? This guide shows how to remove your PIN and other sign-in options from Windows 10.

This guide tackles PINs, face recognition, fingerprint scans, and security keys. Because you cannot delete a password, this guide also walks you through deleting your account from a Windows 10 PC. You can always create another account that doesn’t have an associated password.

Remove a PIN, Face, or Finger

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Sign-In Options” entry on the menu followed by “Windows Hello PIN” listed on the right. This entry expands to reveal a “Remove” button. Click it once.

Windows 10 presents a warning. Click the “Remove” button again to confirm.

The steps to remove your face and finger are nearly identical to removing a PIN. Simply choose “Window Hello Face” or “Windows Hello Finger” instead and then follow the above removal steps.

Remove a Security Key

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Sign-In Options” entry on the menu followed by “Security Key” listed on the right. This entry expands to reveal a “Manage” button. Click it once.

Insert your Security Key into an open USB port as prompted and touch the key’s flashing icon. Once Windows 10 verifies the key, click the “Reset” button followed by the “Close” button.

Remove Your Account (Administrator)

If you’re trying to remove the sole account from a PC you own, you can’t simply delete it. Instead, you must create a local user account, set it as administrator, log into that account, and then delete your original account. The alternative is to reset the PC.

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Family & Other Users” entry on the menu followed by the “+” button next to “Add Someone Else to This PC” listed under “Other Users” on the right.

Click the “I Don’t Have This Person’s Sign-In Information” link in the following window.

Click the “Add a User without a Microsoft Account” option.

Enter a username, password (twice), establish three security questions, and then click the “Next” button.

You can create an account without a password, but this will serve as an administrative account, so not establishing a password is a bad idea unless you’re selling or giving the PC to another individual. Even then, a full reset is the better option.

When complete, you’ll see the new local account listed under “Other Users.” Select the new account and click the “Change Account Type” button.

In the “Change Account Type” pop-up box, select “Administrator” in the drop-down menu and click the “OK” button.

Next, click the Windows button, click on your profile icon, and select the new account in a pop-up menu to log in to Windows 10 using that account.

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Family & Other Users” entry on the menu. Select your account on the right listed under “Other Users” to expand its options. Click the “Remove” button.

Windows 10 boasts a suite of security features to keep your PC safe. But what if you need to remove a password or security key? This guide shows how to remove your PIN and other sign-in options from Windows 10.

This guide tackles PINs, face recognition, fingerprint scans, and security keys. Because you cannot delete a password, this guide also walks you through deleting your account from a Windows 10 PC. You can always create another account that doesn’t have an associated password.

Remove a PIN, Face, or Finger

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Sign-In Options” entry on the menu followed by “Windows Hello PIN” listed on the right. This entry expands to reveal a “Remove” button. Click it once.

Windows 10 presents a warning. Click the “Remove” button again to confirm.

The steps to remove your face and finger are nearly identical to removing a PIN. Simply choose “Window Hello Face” or “Windows Hello Finger” instead and then follow the above removal steps.

Remove a Security Key

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Sign-In Options” entry on the menu followed by “Security Key” listed on the right. This entry expands to reveal a “Manage” button. Click it once.

Insert your Security Key into an open USB port as prompted and touch the key’s flashing icon. Once Windows 10 verifies the key, click the “Reset” button followed by the “Close” button.

Remove Your Account (Administrator)

If you’re trying to remove the sole account from a PC you own, you can’t simply delete it. Instead, you must create a local user account, set it as administrator, log into that account, and then delete your original account. The alternative is to reset the PC.

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Family & Other Users” entry on the menu followed by the “+” button next to “Add Someone Else to This PC” listed under “Other Users” on the right.

Click the “I Don’t Have This Person’s Sign-In Information” link in the following window.

Click the “Add a User without a Microsoft Account” option.

Enter a username, password (twice), establish three security questions, and then click the “Next” button.

You can create an account without a password, but this will serve as an administrative account, so not establishing a password is a bad idea unless you’re selling or giving the PC to another individual. Even then, a full reset is the better option.

When complete, you’ll see the new local account listed under “Other Users.” Select the new account and click the “Change Account Type” button.

In the “Change Account Type” pop-up box, select “Administrator” in the drop-down menu and click the “OK” button.

Next, click the Windows button, click on your profile icon, and select the new account in a pop-up menu to log in to Windows 10 using that account.

Click the Windows button followed by the gear icon located on the Start Menu’s left edge. This opens the Settings app.

Click on the “Accounts” tile in the following window.

The “Accounts” section opens to “Your Info” by default. Click the “Family & Other Users” entry on the menu. Select your account on the right listed under “Other Users” to expand its options. Click the “Remove” button.

Windows 10 is the most widely used operating system these days. It provides a very friendly user interface and is extremely easy to use. All of the operating systems possess different ways of logging into them. You can either have a simple login mechanism in which you can log in to your system automatically without providing any login credentials or you can have a credential-based Sign-in. In this article, we will talk about the different Sign-in options that are available in Windows 10. We will explore how these options provide security to your systems. We will discuss the implications of removing these options and we will learn how to remove the PIN and other Sign-in options on Windows 10.

What are the Different Sign-in Options in Windows 10?

If we talk about Windows 10, then following are the six different Sign-in options that it provides:

• Windows Hello Face
• Windows Hello Fingerprint
• Windows Hello PIN
• PIN
• Password
• Picture Password

The first three options are valid only for those Windows 10 devices that have Windows Hello service available. However, the last three options are generic and are available in every Windows 10 device.

How do they Play an Important Role in Securing your System?

Whenever you have an account online or on a hardware device, you always prefer to keep it protected i.e. you do not want to allow everyone to have access to it. To ensure this, you take certain security measures such as password protecting your accounts. What these measures essentially do is that they prevent any third person or intruder from breaking into your system since your password or any other credentials that you have used to protect your system are kept secret and are only known by their owner. That is why all the illegal accesses to your system are denied as long as you manage to keep your particular Sign-in credential secret.

Should you Ever Consider Removing these Options?

There are very rare situations in which you would feel the need for removing any of the Sign-in options you have because they are responsible for securing your systems. Removing these options means that your systems will be vulnerable to all the external attacks and threats and any illegitimate user will be able to break into your systems. That is why it is highly not recommended to do so. However, if for any reason, you still feel like removing these options may be for easier accessibility, then do it at your own risk because then Windows 10 will not going to guarantee you any protection against illegal accesses.

How to Remove your PIN and other Sign-in Options on Windows 10?

In order to remove your PIN on Windows 10, you will need to perform the following steps:

1. Type Settings in the search section of your taskbar and double click on the search results in order to launch the Settings window.
2. In the Settings window, double click on the Accounts tab as highlighted in the image shown below: Click on the Accounts tab from the Settings Window
3. Now select the Sign-in Options tab from the left pane of the Accounts window. Select the Sign-in Tab from the Accounts Window
4. Locate the PIN section in the Sign-in Options window and then click on the Remove button as highlighted in the following image: Click on the Remove Button located below the PIN Section
5. As soon as you will click on this button, Windows 10 will prompt you with a confirmation message. Click on the Remove button again in order to provide confirmation. Provide Confirmation of your Decision by Clicking on the Remove Button Again
6. Windows 10 will now ask you for your current Sign-in Password. Just enter your password and click on the OK button in order to save your settings. Enter your Windows 10 Password and Click on the OK button in order to Remove your PIN on Windows 10

In the same manner, you can remove all other Sign-in options like the PIN. However, the point to be noted here is that you will only be able to set up and remove these Sign-in options if you have a login password. For removing the login password in Windows 10, you will have to follow the steps mentioned below:

1. Type netplwiz in the search section of your taskbar and click on the search results in order to launch the User Accounts window.
2. In the User Accounts window, uncheck the checkbox corresponding to the field saying, “Users must enter a user name and password to use this computer” as highlighted in the image shown below: Uncheck the Highlighted Checkbox
3. Now click on the Apply button. Click on the Apply Button
4. As soon as you will click on it, Windows 10 will ask you for your current password. Just enter your password and then click on the OK button in order to save your settings as highlighted in the following image: Finally, Enter your Current Password and Click on the OK button in order to Remove your Login Password in Windows 10

As soon as you will save these changes, Windows 10 will no longer ask you for your password at the time of login. However, we will recommend you again not to remove these Sign-in options unless you are very sure that no one else except for you will even try to access your computer system. Otherwise, your critical data will be at stake.

By Echo | Follow | Last Updated December 06, 2019

Summary :

Have you ever encountered the Windows 10 Pin sign in options not working error? If yes, don’t worry too much. Refer to this post offered by MiniTool Solution. It will show you 2 useful solutions to fix this annoying issue. You can try to delete the Ngc folder and then add a new PIN code. You can also try to repair corrupted system files with SFC.

You may have experienced these situations: PIN sign in Windows 10 greyed out, Windows 10 sign in options not showing, Windows 10 sign in options disabled and Windows 10 Sign-in options in settings blank.

Don’t worry. The sign in option not working issue is probably because of the corrupted PIN file or the damaged Ngc profile during the installation. It is easy to fix. The following part will show you how to solve the Windows 10 Pin sign option not available.

Microsoft has added the passwordless sign-in option to the latest Windows 10 Insiders Preview Build 18936. Let’s go to learn some details on this news.

Fix 1: Delete the Ngc Folder and Add a New PIN Code

The Ngc folder stores many files responsible for PIN related settings, so the PIN not working in Windows 10 issue may be triggered by it. In this case, you can try to make some minor changes to the files contained in Ngc.

Delete Ngc Folder

Step 1: Login your Windows 10 with your password as Administrator.

Step 2: Open the File Explorer window, then click Local Disk (C:).

Step 3: Now, click View on the top and check Hidden items.

Step 4: Navigate to this path: Windows\ServiceProfiles\LocalService\AppData\Local\Microsoft.

Step 5: Find the Ngc folder, then select all the files in it and delete them.

Step 6: Reboot your computer.

Create a New Pin Account

Step 1: Press the Win key + I key to open Windows Settings.

Step 2: Click Account and then select Sign-in options from the left.

Step 3: Under the PIN section, click Add.

Step 4: Enter the password for your account and then click Sign in.

Step 5: In the Set up a PIN window, enter your identification number in the New PIN and Confirm PIN boxes and select OK.

After you finish deleting the Ngc Folder and adding a new PIN account, check if the Windows 10 Pin sign in options not working error has gone.

Fix 2: Repair Corrupted System Files with System File Checker

If the user profile is corrupted because of a damaged installation or update, then the Windows 10 Pin sign in options not working issue may occur. Thus, you can try to repair the user profile with System File Checker (SFC).

SFC is a great built-in tool in Windows. It can help you scan all missing or corrupted system files during the installation or update, and then replace these files. Here is a quick guide on how to use SFC.

Step 1: Type cmd in the Search bar, click Command Prompt and then select Run as administrator.

Step 2: Now, type sfc /scannow and press Enter to run the command. SFC will start to check all missing or corrupted system files and then automatically help you fix them.

After you finish all the steps above, the Windows 10 Pin sign in options not working issue should be fixed.

Bottom Line

To sum up, this post has shown you 2 useful methods to fix the Windows 10 Pin sign in options not working error. If you are experiencing this error, don’t be panic. Try the methods mentioned in this post.

• Facebook
• Twitter
• Linkedin
• Reddit

ABOUT THE AUTHOR

Position: Columnist

Echo is a technology enthusiast, has published many professional technical articles. She previously specialized in backup and recovery of data, files, disk partition, and system. Now she writes mostly about YouTube expertise.

As an enthusiastic technical writer, Echo believes that technology makes our life better and she has been trying to make her technical articles easier to understand and help more people. You must benefit a lot from reading her article.

On her spare time, she likes listening to songs and hiking.

One of the most discussed features of Windows 10 was Hello. Windows Hello offers users a centralized way to manage their sign-in process. What’s more? Hello brought with itself a number of new ways to log into the computer. Password and PIN being just two of them. Not everyone uses or even needs them. What if you are working alone with no one to worry about? We will see how to remove passwords and remove PIN from Windows 10.

Here are the steps to remove PIN from Windows 10 PC.

How to Remove PIN from Windows 10

Firstly, hat you need to know is that there is no direct way to remove PIN or password from your user account. In that case, you will have to create a new user account and we will cover that too below. And if that doesn’t work, there is a hack.

We will begin with Windows 10 Hello PIN first.

1. Press Windows Key+I to open Settings and click on Accounts.
2. Click on Sign-in options in the left window-pane.
3. Click on Windows Hello PIN.
4. Select Remove. You will see the remove button only if the PIN is active.
5. Click on the Remove button again.
6. Enter your Microsoft account password to verify it is indeed you who wants to remove the Windows 10 Hello PIN and click OK.

If the Windows 10 PIN was removed successfully, you should see the Add button there. That’s how you will re-add the PIN in the future, should you change your mind.

Note that you will follow the same steps to remove other Windows Hello sign-in options like Face, Finger, and others. In case of a security key, you will click the Reset button after connecting the physical security key in a USB port. But not the password!

Remove Password from Windows 10

You will find the Password option on the same screen where you removed the PIN. Click on it once and you will realize there is no way to remove the password. You can only change it which is not what we want.

There is only one way left and that is to create a new user account and delete the old one. We are talking about administrator account here. Be careful as you always need to have at least one admin account on your computer.

Lack of one will leave you with very restricted access and you don’t want that. In fact, I recommend my readers to have a spare admin account in cases of emergency. Like when you forget the password or are locked out of your account due to an error or bug or hacking attempt.

1. Open Settings again and go to Accounts.
2. Click on Family & other users and select Add someone else to this PC option.
3. Click on ‘I don’t have this person’s sign-in information‘.
4. Select ‘Add a new user without a Microsoft account.’
5. Enter the account username, password (twice), and click on Next.

You will see additional fields after entering the username and password. These are security questions to recover your account in case you forget sign-in details. Choose three separate questions with three separate answers. I would recommend you to note them down somewhere safe and preferably offline.

To truly remove the password from your account, you need to reset your computer that will result in the loss of all data including installed apps. You will have to take a backup and restore everything. I won’t recommend it until you absolutely need to do it.

Deleting Old Account on Windows 10

When you have a new Administrator account without a password, you can delete the old one. Make sure to give the new user account admin rights before deleting the old one. Go back to Settings and you should see the newly created account listed. Click on it once and go through the steps below.

1. Open Settings and go to Accounts.
2. Select the Change account type.
3. Select Administrator from the drop-down menu in the pop-up that follows and click OK to save.
4. Switch user account from the Start menu.
5. Now go to Settings > Accounts.
6. Click on Family & Other Users.
7. Right-click on the user and click Remove.

Follow the on-screen instructions after that.

Old Hack to Remove Password on Windows 10

If the above method doesn’t work for you and Windows still asks for a password, here is a neat hack. This is an old school hack and you can use the administrative privilege to remove password on Windows 10.

1. Search for ‘netplwiz‘ in the Start menu and open it as Administrator.
2. Select the user account for which you want to remove the password.
3. Unselect ‘Users must enter a user name and password to use this computer‘ option.
4. Click the Remove button.
5. Click on Apply and save all settings

You may be asked to enter the account password (twice) to confirm this change. If so, do it. Reboot your computer and you should be able to sign in without entering a password. Just hit Enter to sign in.

There are a few things that you need to note here. These methods won’t work if you are using an enterprise connected or work computer which is controlled by your employer or system admin.

Microsoft released Windows Hello PIN along with other sign-in options to make it easier for users to sign in without having to enter user name and password without compromising security or privacy. You can use a simple four-digit numerical PIN like 1234 if you don’t really care about security. Other than that, one of the above methods should work for you.

Disclosure: Mashtips is supported by its audience. As an Amazon Associate I earn from qualifying purchases.

The 12 Best Linux Distributions for Windows Users

How to Turn Fast Startup On or Off in Windows 10 & 11

How to View Devices by Connection in Device Manager

Here Are All the Device Manager Error Codes and Solutions

Show Your Support for MajorGeeks a Donation

5 Ways to Open Administrative Tools in Windows 10 & 11

How to Create a Safely Remove Hardware Shortcut in Windows 10 & 11

How to Play Minecraft Classic For Free

How to Check Your Available VRAM in Windows 10 & 11

Should You Clean Your Windows Registry?

Published by Timothy Tibbetts on 07/12/2021

Windows Hello is an option for Windows 10 and 11 that lets you log on easier by using a PIN you create. However, there are some apps that Windows Hello opens when you don’t want it to. Here are your options to stop Windows Hello from popping up.

TIP : Hard to fix Windows Problems? Repair/Restore Missing Windows OS Files Damaged by Malware with a few clicks

How to Disable Windows Hello PIN in Windows 10 and 11 – Settings

Click on Start > Settings > Account > Sign-in options.

Click on Windows Hello Pin on Windows 10 or PIN (Windows Hello) in Windows 11.

Click on Remove.

In some cases, if you have a Windows Hello pin set up, you can’t remove the option unless you choose one of the other available sign-in options.

Some users have reported that even by removing a PIN, they still receive a Windows Hello popup. In this case, you can use Group Policy Editor or the Registry Editor.

How to Disable Windows Hello PIN in Windows 10 and 11 – Group Policy Editor

Windows 10 and 11 Home users will need to enable Group Policy Editor or use the Registry method.

Computer Configuration > Administrative Templates > System > Logon

Double-click on Turn on convenience PIN sign-in

Click on Disabled to disable the prompt or Not Configured for the default setting.

How to Disable Windows Hello PIN in Windows 10 and 11 – Registry Editor

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PolicyManager\default\Settings\AllowSignInOptions

Double-click on value on the right pane.

Change the Value data to 0.

Change the Value data back to 1 to enable Windows Hello.

By Sherry | Follow | Last Updated December 23, 2021

Summary :

By default, you need to sign in to your computer with a password. But actually, there are six sign-in options on Windows 10. If you don’t want to type the password every time while accessing your PC, you can change sign-in settings. More detailed information are listed in this post provided by MiniTool Partition Wizard.

Quick Navigation :

• How to Access the Sign-in Settings
• Windows Hello PIN
• Picture Password
• User Comments

When you build a new computer, it is default that you need to enter the password to access the computer. It prevent your PC from being accessed by others you don’t trust.

However, for some users, especially those who have a long and complicated password, it would be a trouble. Because they need to spend some time every time when they need to open their PC. In addition, some of them might forget the password.

Fortunately, Windows 10 offers other sign-in options and you can choose one you prefer.

How to Access the Sign-in Settings

To navigate to your sign-in settings on Windows 10, you can follow the steps below.

Step 1: Press Win + I to open Windows Settings quickly.

Step 2: Click Accounts category.

Step 3: In the following window, select Sign-in options from the left pane.

Then you can view the sin-in options and change sign-in settings on Windows 10.

This post gives you 8 solutions to fix Windows 10 no login screen problem.

Windows Hello PIN

Windows Hello Face and Fingerprint will be unavailable if you haven’t set up a PIN code. So, let’s see how to set up this sign-in option first.

Step 1: Click Windows Hello PIN and click Add.

Step 2: In the pop-up window, input your Microsoft password and click OK.

Step 3: Input the PIN you want to set to the both boxes and click OK. By default, the PIN is required to contain numbers only. If you want to use letters and symbols as well, you can check Include letters and symbols.

If you want to remove or change your PIN, you can refer to the following post: How to Remove/Change/Reset PIN Windows 10.

Once you added Windows Hello PIN to your computer, you can check whether Windows Hello Face or Fingerprint is available on your device. The biometric facial recognition is more secure and user-friendly than password. However, this feature has specific hardware requirements and not all PCs are equipped with it.

If it’s supported on your PC fortunately, you can follow our previous post to set up the biometric recognition: What Is Windows Hello & How To Set It Up On Your PC.

Picture Password

Another sign-in option is picture password. It allows you to use a favorite picture to sign in to Windows, apps and services. Instead of PIN or password, you need to draw on a picture when you want to open your computer.

Let’s see how to do it.

Step 1: Click Picture Password and select Add.

Step 2: Input your Microsoft password in the following window and click OK to continue.

Step 3: In the left pane, select Choose picture.

Step 4: In the pop-up window, you can browse through your photos. Just select your favorite picture and click Open.

Step 5: Select Use this picture to continue or click Choose new picture to change the picture.

Step 6: You will be asked to draw three gestures on the picture and then repeat the gestures in the same order.

Step 7: Confirm your picture password again and click Finish to complete the operation.

After you finish the setup, you can log in to your PC with the picture password next time.

That all about change sign-in settings on Windows 10. By the way, if you don’t want to use any passwords, you can set auto login on Windows 10.

ABOUT THE AUTHOR

Position: Columnist

Sherry has been a staff editor of MiniTool for a year. She has received rigorous training about computer and digital data in company. Her articles focus on solutions to various problems that many Windows users might encounter and she is excellent at disk partitioning.

She has a wide range of hobbies, including listening to music, playing video games, roller skating, reading, and so on. By the way, she is patient and serious.

Can’t get your PIN to work on Windows 10? Best answer: Reset Windows Hello by deleting the contents of the NGC folder to fix the problem.

• Tweet
• Share
• Submit

Windows 10 has many ways to sign in to an account, including using PIN, which is a faster and convenient method of authentication compared to a traditional password. However, sometimes you won’t be able to use a PIN to login, trying to change or add a new PIN will result on a “Something went wrong. Try again later” error message, and you may even not be able to remove the current PIN from the Settings app.

When you experience problems using Windows Hello PIN, it’s likely that the system files responsible for this feature are missing or corrupted. Luckily, there’s a workaround that allows to quickly fix the problem.

In this guide, you’ll learn the steps to fix the issue that could prevent you from removing, configuering, or using a Windows Hello PIN to login on Windows 10.

How to fix Windows Hello PIN problems on Windows 10

To fix Windows Hello PIN when you can’t use, change, remove, or add PIN to your account, use these steps:

Open Start.

Search for Command Prompt, right-click the top result, and select the Run as administrator option.

Type the first command to take ownership of the NGC folder and press Enter:

Command Prompt takeon command

Type the second command to take ownership of the NGC folder and press Enter:

Command Prompt icacls command

Open File Explorer.

Browse to the following path:

Click the Select all button from the “Home” tab.

Click the Delete button from the “Home” tab.

Delete PIN files inside NGC folder

Restart your device.

Sign into your account using the password.

Set up a new PIN (if applicable).

Once you complete the steps, you can start using your PIN again. If you didn’t get the prompt to create a PIN, you set up one in the Accounts settings page.

If you had more than one account configured on the device, each user will have to recreate their PIN as well.

We may earn commission for purchases using our links to help keep offering the free content. Privacy policy info.

All content on this site is provided with no warranties, express or implied. Use any information at your own risk. Always backup of your device and files before making any changes. Privacy policy info.

With the latest update (OS Build 19043.1288) of Windows 10, you should notice that your PC/Laptop login screen does not show the other log-in options. Like if you have enabled the pin login method then Windows shows only the pin login method on the Windows login screen.

Now, there are various methods to fix this issue. But I found a simple method during my use to fix it and if you are thinking about why causing the issue with your PC or Laptop, there is one reason for that and that’s you have “Clean Installed” the latest version of Windows 10.

When you open the settings and see the sign-in options you won’t see the traditional “Password” method and “Picture Password” methods for signing in to the system. So, how are we going to fix the “Missing Windows Sign-in Options on Windows 10?” for that please follow these simple steps to fix it.

Steps to Fix Missing Login Options on Windows 10

Step – 1. Open Windows run

Open Windows run by using keyboard short-cut Win+R, and as you can see the image above, you must type ms-settings:signinoptions to open Windows sing in option setting page.

Step – 2. Toggle off Windows Hello Sign-in for Microsoft Account

When you open the Windows Sign-in options page, you will see “Require Windows Hello sign-in for Microsoft accounts” and it will be toggle on for higher security purposes. However, that is the cause for not showing the password sign-in method on the login screen. So, as shown in the image above you must toggle off the switch and proceed to the next step.

Step – 3. Restart the System

Now, you must restart the system to see the changes. However, if the login screen does not show any login option like pin or password method or just showing blank screen or in simple language if you are unable to login your system then there are some methods to fix it, which we will discuss in our next article.

After restarting the system, you will see the Sing-in options, when you click on it Windows will prompt you to choose your preferred method for login to the system.

Step – 4. Check Windows Sing-in options setting

When you open the Sign-in options again, you will see the missing sign options. As you can see in the image above, the Password method and Picture Password method will appear after the system restart.

Conclusion

This was a short tutorial to fix the missing Windows 10 login options from the login screen as well as on the Windows Sign-in options setting page. If you are facing any issue or describe method isn’t working for you then please comment on the comment box. We will try to help you guys and don’t forget to share the article.

If you like our content, please consider buying us a coffee.
Thank you for your support!

Account Information

Share with Your Friends

How to make your PC passwordless in the Windows 10 May 2020 Update

How to make your PC passwordless in the Windows 10 May 2020 Update

You don’t need an account password to sign into Windows 10 version 2004.

We may be compensated by vendors who appear on this page through methods such as affiliate links or sponsored partnerships. This may influence how and where their products appear on our site, but vendors cannot pay to influence the content of our reviews. For more info, visit our Terms of Use page.
TechRepublic

Microsoft has long offered its Windows Hello feature to let you sign into your Windows 10 PC with a PIN, fingerprint, or facial recognition. But when you’re at the login screen, you’ll notice that signing in with a password is still available. That’s fine if you want your password as a backup method for authentication, but if a hacker ever compromises your Windows password and gains access to your computer, they could easily sign in with your account. One way to guard against this is to remove the password option from the login screen in Windows 10. You can do that with the Windows 10 May 2020 Update, aka Windows 10 2004. Here are the steps.

SEE: Windows 10 Start menu hacks (TechRepublic Premium)

First, make sure you’re running Windows 10 version 2004. To check, go to Settings | System | About. Look in the section for Windows specifications. If the version says 2004 or higher, you’re set (Figure A).

Figure A

If you don’t have Windows 10 2004 and want to install it, go to Update & Security and Windows Update. If the Feature Update To Windows 10, Version 2004 is ready for your PC, click the Download And Install link to apply it (Figure B).

Figure B

After the update is installed, make sure you’ve enabled some means of Windows Hello authentication so you don’t need to rely on your Windows password. If necessary, go to Settings | System | Sign-in Options. If you haven’t already done so, set up a PIN, or a fingerprint, or facial recognition (Figure C).

Figure C

Scroll down the Sign-in Options screen. Make sure the switch for Require Windows Hello Sign-in For Microsoft Accounts is turned off (Figure D).

Figure D

Sign out of Windows and then go back to the sign in screen. Click the link for Sign-in Options. Select each of the icons and notice that the option for password is available as usual (Figure E). Sign into Windows using your preferred method.

Figure E

Go to Settings | Account | Sign-in Options. Scroll down the screen and turn on the switch for Require Windows Hello Sign-in For Microsoft Accounts (Figure F).

Figure F

Sign out of Windows. Back at the sign-in screen, click the link for Sign-in Options. Select each of the icons, and you’ll find that the option for password is now no longer accessible (Figure G).

Figure G

Microsoft Weekly Newsletter

Be your company’s Microsoft insider by reading these Windows and Office tips, tricks, and cheat sheets.

We have laptops with smartcard slots, but don’t use smartcards.

I would like to remove the smartcard option from the sign-in screen. It just causes confusion in Windows 10. It isn’t intuitive to users for user to know to click on the “key” icon to log in with a password. If there is only the option for password, it will save some time and frustration.

I have set the smartcard service to disabled and rebooted a laptop, but the option is still there.

I have also tried disabling the smartcard in the system BIOS, but it didn’t help. Maybe it has to be disabled in the BIOS before the OS is installed.

What do you have to do remove smartcard as a sign-on option?

The Edge is Real: Harness its Force

4 Replies

I’ve found this on a google search, I haven’t got any machines handy to test on. Give it a go and report back.

look into Group Policy there is bound to be something in there for it.

I’ve found this on a google search, I haven’t got any machines handy to test on. Give it a go and report back.

After disabling the service, changing the registry key and rebooting, smart card is still showing both at the sign-in screen and in Remote Desktop.

As noted on the following post: , you will need to disable your smart card device so Windows does not use that option. I have not seen an option in Group Policy so far.

This topic has been locked by an administrator and is no longer open for commenting.

To continue this discussion, please ask a new question.

Snap! ChromeLoader, Kerberos Relay attacks, VMware acquisition, & more!

Your daily dose of tech news, in brief. Can you believe it’s been over 25 years ago since Bill Gates wrote the (at the time internal) memo, The Internet Tidal Wave. In it, he stressed that the internet is “crucial to every part of our business” and.

Wireless Mouse Options

I know everyone will have their own opinion but I have to ask the question for my own input. Does anybody spend 100.00 on a mouse?Do you have a “go to” mouse for yourself or end users?Are you still using a trackball?Are you still using a roll ball mouse f.

How do you point out your boss faults in a nice way?

I could see my department head is overwhelmed by many issues.But I feel there are a lot of things which my boss hasn’t done but should be done.If I come with long list of things that are not right, I’m concerned the spirit might be crushed for doing a ter.

Spark! Pro series 26th May 2022

Today in History: 1897 – Dracula Goes On Sale The first copies of the classic vampire novel Dracula, by Irish writer Bram Stoker, appear in London bookshops on May 26, 1897. A childhood invalid, Stoker grew up to become a football (soccer) star at.

It Comes Down to This.

32+ years in IT at all levels, and the job search returns this as my best matchJust wow. Way to validate my existence.

Windows Hello Sign In options PIN Missing

I’m using all Windows 10 systems with version 2004 with all updates in a simple domain. The server is Windows Server 2012 R2 with all updates. I’m trying to deploy Windows Hello with the PIN option via the GPO.I have enabled “Turn on convenience PIN sign-in”. This GPO is for only two systems and enforced.

This is also turned in Edit Group policy:
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System
AllowDomainPINLogon 1

An administrator system I only have two options in the Sign-in options screen. The Security Key and Password. I do have other GPOs for this system. Could there be an effect from those and what could it be? How do I get the PIN option to show.

1 Answer

Try setting this registry key and reboot:
[ HKEY_LOCAL_MACHINE \ SOFTWARE \ Policies \ Microsoft \ Windows \ System ] “ AllowDomainPINLogon” = dword ：00000001

Also, “use Windows Hello for Business” has to be set to “not configured”.

From my research, a user cannot create a convenience PIN in Windows 10 Version 1607 and later version when the Use Convenience PIN and Use Windows Hello for Business policies are both enabled unless the device is joined to Azure Active Directory in some way.

Do not configure settings other than PIN complexity if you want to use a convenience PIN. Having Windows Hello for Business and Turn on convenience PIN sign-in enabled prevents you from setting a PIN.

Hope above information can help you.

============================================
If the Answer is helpful, please click “Accept Answer” and upvote it.
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

I did those yesterday from a remote connection. I connected directly this morning and all the settings were there and I was able to set a pin. Does this PIN follow the account or is it only for this system that it was set on?

You can use a password, biometrics — or nothing at all

Share this story

• Share this on Facebook
• Share this on Twitter

Share All sharing options for: How to change (or eliminate) your Windows 11 sign-in

Photo by Tom Warren / The Verge

If you mainly use your Windows 11 computer at home, and you don’t have curious children or roommates who might mess with it, then having to sign in with a password can be a pain in the neck — especially if you have a long, secure, and complicated password.

Thankfully, you have alternatives. If you do take your Windows laptop out occasionally, there are several other ways you can sign in to your laptop that are a little simpler. We’ll also show you how to remove your password altogether (although, to keep your device secure, we recommend that you go with one of the options above rather than eliminating any kind of sign-in).

You also have the option to use a physical security key (usually a USB key) to sign in, but you’ll have to purchase that key separately. Here are the methods you can use to sign in without any additional equipment.

Access your sign-in settings

You will find all your various sign-in options by clicking on Start icon > Settings > Accounts > Sign-in options.

Under “Sign-in options,” you’ll see several different methods for signing in, including using your fingerprint, a PIN, or a picture password.

There, under Ways to sign in, there are several ways that you can adjust how to sign in to your device. The methods that Windows offers include:

• Facial recognition (using Windows Hello)
• Fingerprint recognition
• Using a PIN (can be a combination of numbers or numbers and letters)
• Using a physical security key
• Typing in your password
• Using a picture password (you’ll be presented with a photo and will need to draw three different swipes on the photo to unlock)

To enable any of these methods, just select the one you’re interested in and then click on Add. Windows will then walk you through the process of creating that method of signing in to your computer. Once you’ve added it, you can come to the same place to manage it or remove it.

A couple of things to be aware of:

If one of the sign-in options is not available (for example, if your camera is not capable of using Windows Hello for facial recognition), there will be a notice of that underneath the name of the option.

Note that you will need to set up a PIN first before you can set up either facial recognition or fingerprint recognition (the PIN acts as backup in case the biometric systems don’t work).

Adjust when you need to sign in again

If you occasionally walk away for a few minutes, you may find it irritating to have to sign in again because your system has gone to sleep. You can adjust how often you need to sign in again.

• Beneath Ways to sign in is a section called Additional settings, where you can find additional security settings — one of which adjusts when your device asks you to sign in again after you’ve been idle.
• Look for If you’ve been away, when should Windows require you to sign in again? and click on it.
• The associated drop-down menu lets you select from a range of options, from every time the system has gone dark to if it’s been dark for 15 minutes. You can also select Never.

You can avoid having to log in each time your system goes to sleep.

(Note: It’s possible that this particular feature will be grayed out — as happened to me. In order to use it, I had to disable fingerprint recognition. Thank you to TenForums for helping me solve this issue.)

Remove a password altogether

Typing in your password can be a hassle, which is why there are alternative sign-in methods. If you want to go an extra step further, you can remove your password altogether. (Of course, disabling your password altogether is a security risk — using at least a simple PIN is a better move.)

However, if you’re determined on losing that password, here’s how you can do it.

• Click the Start icon
• Search for and open netplwiz

Search for the “netplwiz” command to disable your password.

• A window will open. Uncheck the box next to Users must enter a user name and password to use this computer.

Here, you can remove the password requirement.

• Then click Apply
• Enter your password twice in the pop-up window and click OK
• Click OK again

The changes will go into effect after you restart your device. Note that this doesn’t get rid of your password, but makes it so you don’t need it to start the system. Also, it means that only your login will not need a password; if there are multiple logins to the system, you will have to go through the same process for each login. And if you find you feel safer with a password:

#1 Oxonsi

The “Sign-in Options” link is suddenly missing from my Windows 10 login screen. I had it defaulted to sign-in with PIN. Now it has reverted to signing in with a password without the option to change back to PIN.

Under Settings, Accounts -> Sign-in options, I now see the option to “Add” a PIN [instead of “Change” and “I forgot my PIN”], as if I had never set a PIN. If I click on “Add”, I am allowed to add a PIN after entering my password. However, it appears the PIN is immediately forgotten by Windows because even after I’ve finished, it still shows only “Add” under the PIN section of Accounts -> Sign-in options. And if I logout, the login screen is still without “Sign-in options” under my name.

Running sfc /scannow showed no integrity violations found.

The last changes I had made to the OS were disabling some non-essential Services. I don’t think that could be related to this issue, but let me know if there is a Windows Service on which the “Sign-in Options” depends.

Otherwise, let me know of any other way I might fix this. I liked the ability to sign-in with a PIN.

BC AdBot (Login to Remove)

• BleepingComputer.com
• Register to remove ads

#2 garioch7

• Gender: Male
• Location: Port Hastings, Nova Scotia, Canada
• Local time: 03:25 PM

I had the same thing happen to me on one of my computers (Dell laptop) and I could find no easy solution. Since it occurred after a Windows update in February, I presumed MS would fix it in a future update. The “Sign In Options” reappeared a few days after the March updates and a cold boot or two. Go figure!

My main tower was never affected, so I conclude that it only affects some computer configurations. Both of my computers were upgraded to Windows 10 Pro x64 via clean install.

I would check your Windows 10 update history and make sure your updates are current. I had some issues with the March updates getting one of them to install. MS has not yet rolled out the Creator’s Update to me (old computers), so I am still on Build 1607.

Good luck. Have a great day.

Graduate of the Bleeping Computer Malware Removal Study Hall

#3 Oxonsi

Thanks for your reply.

In my case, this problem arose on a new, clean install of the Creator’s Update, version 1703, build 15063.138. But the issue is not part of the Creator’s Update because “Sign-in options” was appearing on the login screen for a while, before it mysteriously disappeared.

I’m not sure if there were a few other updates that might have broken it. I did disable some Services, but I doubt I that is related to this issue. I have another Windows 10 installation on which I disabled the same Services, and I’m still able to login with PIN on that machine.

I guess I’ll have to settle for using a password to login for now on this new Windows 10 installation. Hopefully the option to use a PIN will return at some point. It doesn’t seem like a serious enough problem to trash the entire OS, and start over with a clean install of 10 again.

Thanks again

#4 garioch7

• Gender: Male
• Location: Port Hastings, Nova Scotia, Canada
• Local time: 03:25 PM

Thank you for your post. I hope that your sign-in options reappear, as they did on one of my two computers. I prefer the PIN login method to the password. For some reason, my other computer never “lost” the sign-in options.

Just a random thought – perhaps the “Sign In Options” message is just not displaying on the screen. Did you just try clicking in that area below the password box to see if anything happens . ?

As I said, just a random thought!

Good luck and have a great day.

Graduate of the Bleeping Computer Malware Removal Study Hall

#5 Oxonsi

I discovered the solution in my case: it was related to the CNG Key Isolation Service (KeyIso). I disabled it, but it is required for PIN-login. And I was mistaken in my previous post: I actually did NOT disable that Service on my other machine, which is why the PIN-login always worked there.

I like disabling non-essential services. But one does need to be careful. From the description of the service I did not guess that it was related to anything for which I’m using my machine. But with the benefit of hindsight, it now makes sense that the CNG Key Isolation Service may cause PIN-login to fail.

Description: “The CNG key isolation service is hosted in the LSA process. The service provides key process isolation to private keys and associated cryptographic operations as required by the Common Criteria. The service stores and uses long-lived keys in a secure process complying with Common Criteria requirements.”

I hope this info may be helpful to someone else.

Edited by Oxonsi, 17 April 2017 – 05:08 PM.

#6 garioch7

• Gender: Male
• Location: Port Hastings, Nova Scotia, Canada
• Local time: 03:25 PM

Thank you for your update. I am glad that you solved your problem. Since I don’t disable Windows services, I guess that your “find” does not explain what happened to one of my two computers, unless a Windows update “borked” that service. Since it is working again, I will never know.

Thank you for sharing your solution. Have a great day.

Graduate of the Bleeping Computer Malware Removal Study Hall

#7 Oxonsi

Thanks for your kind words. Yes, I realize my solution probably won’t help everyone with this issue. It was interesting to me in that I didn’t think a Service could be involved with the disappearance of “Sign-in options”. Live and learn I guess.

And thanks again for taking the time to help.

Windows 10 boasts a suite of security features to protect your PC. What if you need to remove a password or security key? This guide shows you how to remove your PIN and other sign-in options from Windows 10.

This guide will talk about the PIN, facial recognition, fingerprint scans and security keys. Since you can’t delete a password, this guide also walks you through deleting your account from a Windows 10 PC. You can always create another account that doesn’t have a password associated with it.

What is System Restore?

Remove a PIN, face or finger

Click the Windows button followed by the gear icon located on the left edge of the Start menu. This opens the Settings app.

Click on the “Account” box in the following window.

The “Account” section opens to “Personal Information” by default. Click on the “Login Options” item in the menu followed by “Windows Hello PIN” listed on the right. This entry expands to reveal a “Remove” button. Click once.

Windows 10 presents a warning. Click the “Remove” button again to confirm.

The steps to remove the face and finger are almost identical to removing a PIN. Just choose “Window Hello Face” or “Windows Hello Finger” instead and then follow the removal steps above.

How to reactivate Windows 10 after a hardware change

Remove a security key

Click the Windows button followed by the gear icon located on the left edge of the Start menu. This opens the Settings app.

Click on the “Account” box in the following window.

The “Account” section opens to “Personal Information” by default. Click on “Login Options” in the menu followed by “Security Key” listed on the right. This entry expands to reveal a “Manage” button. Click once.

Insert your security key into an open USB port as required and tap the flashing key icon. Once Windows 10 has verified the key, click the “Reset” button followed by the “Close” button.

What is a restore point?

Remove your account (administrator)

If you’re looking to remove the only account from a PC you own, you can’t just delete it. Instead, you need to create a local user account, set it as an administrator, log into that account, and then delete the original account. The alternative is to reset your PC.

Click the Windows button followed by the gear icon located on the left edge of the Start menu. This opens the Settings app.

Click on the “Account” box in the following window.

The “Account” section opens to “Personal Information” by default. Click on the “Family and other users” item in the menu followed by the “+” button next to “Add someone else to this PC” listed under “Other users” on the right.

Click the “I don’t have this person’s login information” link in the following window.

Click the “Add a user without a Microsoft account” option.

Enter a username, password (twice), establish three security questions, then click the “Next” button.

You can create an account without a password, but it will serve as an administrative account, so not establishing a password is a bad idea if you don’t sell or give the PC to another individual. Again, a hard reset is the best option.

How to access advanced startup options in Windows 10 or 8

When finished, you will see the new local account listed under “Other users”. Select the new account and click the “Change Account Type” button.

In the “Change Account Type” pop-up window, select “Administrator” in the drop-down menu and click the “OK” button.

Then, click the Windows button, click your profile icon and select the new account in a pop-up menu to log into Windows 10 using that account.

Click the Windows button followed by the gear icon located on the left edge of the Start menu. This opens the Settings app.

Click on the “Account” box in the following window.

The “Account” section opens to “Personal Information” by default. Click on the “Family and other users” item in the menu. Select your account on the right listed under “Other Users” to expand its options. Click the “Remove” button.

You can remove your account password on Windows 10, whether you’re using a Microsoft account or local account, and in this guide, you’ll learn how to perform this task.

• Tweet
• Share
• Submit

Although using Windows 10 with a password is always recommended to keep your computer and files safe and secure from prying eyes, sometimes, depending on the situation, a password may add extra steps to the login process.

If you have a device without critical files, and security is not a concern, Windows 10 includes multiple ways to remove the account password.

In this guide, you will learn the steps to sign in automatically (or remove the logon password) from a Windows 10 device, whether you use a local or Microsoft account. Use these instructions on Windows 11. (See also this video tutorial in the Pureinfotech YouTube channel to complete this task.)

Disable password login on Windows 10

If you use a Microsoft account, it is impossible to remove the password entirely because your credentials are connected to your online account. However, you can configure your computer to sign in automatically to mimic an account without a password.

To bypass the login password on Windows 10, use these steps:

Open Start on Windows 10.

Search for netplwiz and click the top result to open Control Panel.

Select the account to remove the password under the “Users for this computer” section.

Clear the User must enter a user name and password to use this computer option.

netplwiz settings on Windows 10

Click the Apply button.

Confirm the Microsoft account information to sign in automatically.

Automatic sign-in on Windows 10

Click the OK button.

Click the OK button again.

Once you complete the steps, the device will have a password, but it will sign in automatically on every restart.

Remove password login on Windows 10

Alternatively, you can remove the password entirely if you use a Microsoft account, but you have to switch to a local account.

Remove password for Microsoft account

To switch to a local account and remove the password, use these steps:

Open Settings.

Click on Accounts.

Click on Your info.

Click the Sign in with a local account instead option.

Sign in with a local account option

Click the Next button.

Confirm your current password.

Click the Next button.

Create a username for the account.

Leave the “Password” and “Reenter password” fields blank to remove the password entirely.

Remove password from Windows 10

Click the Next button.

Click the Sign out and finish button.

After you complete the steps, the laptop will no longer connect with a Microsoft account, and it will log you in automatically every time you start the system.

Remove password for local account

To remove Windows 10 password from a local account, use these steps:

Open Settings.

Click on Accounts.

Click on Sign-in options.

Select the Password option under the “Manage how you sign in to your device” section.

Click the Change button.

Remove password from local account

Confirm your current account password.

Click the Next button.

Leave the “Password” and “Reenter password” fields blank to remove the password entirely.

Windows 10 remove password local account

Click the Next button.

Click the Finish button.

Once you complete the steps, a password will no longer be required to access the Windows 10 desktop.

When you want to remove a password because it is inconvenient, it is best to switch to faster and more secure authentication methods. For example, you could create a PIN or set up a fingerprint reader that only requires a simple finger swipe.

Remove login password with Command Prompt

To remove the account password with Command Prompt, use these steps:

Open Start on Windows 10.

Search for Command Prompt, right-click the top result, and select the Run as administrator option.

Type the following command to view all the accounts and press Enter:

Type the following command to change the account password and press Enter:

In the command, change USERNAME with the standard or administrator account name that you want to update.

Command Prompt remove password

Press Enter twice to remove the password.

After you complete the steps, the account will no longer include a security password to sign in. If you need to set a new password, you can use the same steps, but on step No. 5, specify a new password.

You can only remove a password with Command Prompt for a local account. If you have a Microsoft account, you will need to use the online settings or the option available through the Accounts settings page (see above).

We may earn commission for purchases using our links to help keep offering the free content. Privacy policy info.

All content on this site is provided with no warranties, express or implied. Use any information at your own risk. Always backup of your device and files before making any changes. Privacy policy info.

By Ariel | Follow | Last Updated December 01, 2021

Summary :

A large number of users want to disable login screen Windows 10. The login screen may bother you each time your start your Windows 10 PC. How to disable login screen Windows 10? This post of MiniTool will walk you through detailed steps.

Quick Navigation :

• Method 1. Disable Login screen Windows 10 from User Accounts Settings
• Method 2. Disable Login screen Windows 10 from Registry Editor
• User Comments

Microsoft released many Windows updates that provide strong security. Sometimes, however, these securities also vex lots of Windows 10 users. For instance, the Windows 10 login screen will pop up every time you start your computer. This sign-in screen appears even when there is no password, causing lots of users want to remove login screen Windows 10.

After Windows 10 disable login screen, you can boot into the Windows system faster and don’t have to enter the password each time. So, it is very suitable for a virtual machine. How to remove login screen Windows 10? Please reading the following content to know detailed steps.

There are 2 simple ways to turn off login Windows 10. You can disable Windows 10 auto sign-in feature in User Account settings or using Registry Editor.

Some users complain about Windows 10 defrag not working. If you war also searching for troubleshooting methods, this post can help you fix the issue.

Method 1. Disable Login screen Windows 10 from User Accounts Settings

Step 1. Press the Win + R keys to open the Run dialog box, and then type netplwiz in the box and hit Enter.

Step 2. In the User Accounts window, select the user accounts that you want to remove login screen Windows 10 and untick the checkbox next to Users must enter a user name and password to use this computer.

Step 3. Click on OK and Apply to execute this change.

Step 4. Type sign in the search box and then select Sin-in options from the best match.

Step 5. Scroll down to reach the Require sign-in section and select Never from the drop-down menu.

Step 6. If you want to disable login screen Windows 10 when waking from sleep mode, you can type power & sleep in the search box, and then select Never under the section When plugged in, turn off after.

Method 2. Disable Login screen Windows 10 from Registry Editor

In addition, you make some changes to Registry Editor to turn off login Windows 10. Please follow the steps below carefully. Also, you can back up the registry to avoid any unexpected situations. Here’s how to do that:

Step 1. Press the Win + R keys to open the Run dialog box, and then type regedit in the box and hit Enter.

Step 2. In the Registry Editor, navigate to the following path and then double click the AutoAdminLogon key.

Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon

Step 3. Change the value from 0 to 1 in the Value data field and click on OK.

Step 4. Double click the DefaultDomainName key and change its value data to EQUIPO, and then click on OK.

Step 5. Back the main panel again, and then double click the DefaultUserName change its value data to AMPARO. Then click on OK.

Step 6. Right-click the empty space on the main panel and select New > String Value to create a new string value. And name it DefaultPassword.

Step 7. Double click the DefaultPassword you just created and enter your account password in the Value data field. Then click on OK.

Windows explorer crashes on right click. Many users are troubled by this issue. If you are trying to fix the issue, this post provides you with several methods.

ABOUT THE AUTHOR

Position: Columnist

Ariel is an enthusiastic IT columnist focusing on partition management, data recovery, and Windows issues. She has helped users fix various problems like PS4 corrupted disk, unexpected store exception error, the green screen of death error, etc. If you are searching for methods to optimize your storage device and restore lost data from different storage devices, then Ariel can provide reliable solutions for these issues.

Abdi Hamid Malik upgraded to Windows 10, and it changed his login password to his Hotmail password. (Hotmail passwords are also Microsoft passwords.)

Microsoft really wants to attach your Windows environment to your online Microsoft account. Whether you think it’s a good thing depends on how you balance convenience with privacy—and how much you trust Microsoft.

But even if you vote for convenience, you may not want to log in with your Microsoft password, which may be harder to remember or type than a Windows login password.

Here are three solutions:

[Have a tech question? Ask PCWorld Contributing Editor Lincoln Spector. Send your query to [email protected].]

Change Microsoft password

If your Microsoft password is too difficult to type every time you boot or wake up your PC, change it to something simple.

But not too simple. Online passwords are more prone to hacking than local ones. It should still be long, complex (letters, numbers, punctuation), and impossible to guess—even if it’s also easy to remember and type.

If you come up with such a password, go to Log in if need be. Click your avatar in the upper-right corner and select View Account.

(About that Viking helmet…it’s a long story.)

On the resulting page, click Change password, then follow the instructions.

Use a PIN

You don’t have to use your Microsoft password to log into Windows 10. You can use a PIN instead.

How can a PIN, which contains only numbers, be as safe as a password that can contain numbers, letters (upper- and lower-case), and punctuation? By staying local. Your PIN doesn’t travel the Internet where it’s more likely to be hacked.

Another layer of protection: A Windows 10 PIN isn’t restricted to four digits. You could use six digits, or seven, or ten. Remember that each additional digit makes the PIN ten times harder to crack.

To make the change, click your avatar at the top of the Start menu and select Change Account Settings.

Select Sign-in options in the left pane, then click the Add button in the PIN section and follow directions.

One note: You may, from time to time, need to use your Microsoft password instead of your PIN—for instance, if you boot into Safe Mode. So don’t forget it.

Use a local account

Your Windows 10 logon doesn’t have to be your Microsoft account. You can convert it to a local account, instead.

But you’ll lose a few features. Windows won’t work as seamlessly with OneDrive, and Cortana doesn’t work with a local account. And you’ll have to log into your Microsoft account in the Store app.

To localize your account, open Change Account Settings as described above. In the Your account section, select Sign in with a local account instead and follow the directions.

You won’t be allowed to use your Microsoft logon name. And you can use any password you want.

Like its predecessors, Windows 10 can be configured by organizations to limit user access to certain settings and features. From a consumer standpoint, you may have encountered one of these business-specific options when, during the Windows 10 upgrade process, you were asked “who owns this PC?” with either you or your organization as the possible answers.

Unfortunately, certain bugs and settings can incorrectly configure your own PC as being locked down by a nonexistent organization, which limits your access to certain settings in the operating system.

If you’re experiencing this issue, you’ll notice in several locations (primarily in the Settings app) that “Some settings are managed by your organization.” If your Windows 10 PC belongs only to you (that is, you have admin control of your PC), here’s how you can reconfigure Windows 10 to fix the “Some settings are managed by your organization” issue.

Resolving the Issue Using Group Policy Editor

Unfortunately, this option is only available to Windows 10 Pro and Enterprise users, Home users can skip this section.

The solution to this problem can be found in the Group Policy Editor, but you’ll need to launch this utility with administrative privileges.

1. To do so, click the Start Menu and type gpedit.msc. The top result should be the Local Group Policy Editor as shown in the screenshot below.
2. Right-click on the gpedit.msc result and select Run as Administrator.
3. In the Group Policy Editor, use the hierarchical list of options on the left side of the window to navigate to Computer Configuration > Administrative Templates > Windows Components > Data Collection and Preview Builds.
4. With Data Collection and Preview Builds selected, you’ll see an option labeled Allow Telemetry on the right side of the window. Double-click it to change its options.
5. At the top of the Allow Telemetry options window, click Enabled. Don’t freak out, privacy advocates. This is a temporary change and we’ll soon turn Windows 10 telemetry back off.
6. With Telemetry Enabled, click the drop-down box in the Options section and choose 3 – Full .
7. Click OK to save your changes and close the window. Next, double-click Allow Telemetry in the Group Policy Editor again to bring the same configuration window back up.
8. This time, select Not Configured instead of “Enabled.” Finally, click OK to save the change and close the window. You can also now quit the Group Policy Editor.
9. Now head back to a location where you previously encountered the “Some settings are managed by your organization” message. You should see that the message is now gone and that you have full access to your Windows 10 settings.

Note, however, that this fix is intended for individually-owned consumer PCs. If your Windows 10 PC or license is owned by your company or organization (or was initially set up that way), there will be other settings which will continue to limit your access to certain functions and you shouldn’t change Group Policy settings without consulting your IT administrator.

Adjust Your Data Sharing Usage

Now, this method can actually be performed by Windows 10 Home users, so you can read this one.

1. Open the Start menu and click on Settings.
2. Next, click on Privacy.
3. Now, click on Diagnostics & feedback.
4. Then, if it isn’t already, click on Optional diagnostic data, this used to be labeled as Full. As implied, this will send back significantly more data for Windows to analyze.
5. Next, click on Required diagnostic data, this used to be labeled Basic.

Removing Work or School Accounts to Fix the Error

If the steps above didn’t solve your problem, then you might need to delete some accounts associated with your school or work.

1. Again, click on the Start menu and select Settings.
2. Next, click on Accounts.
3. Now, click on Access work or school.
4. Then, select any accounts associated with your work or school and remove it. Note, you’ll want to make sure the accounts aren’t still needed and that any data you need is backed up.

Fixing Windows 10 Bugs

Unfortunately, errors and bugs occur in any OS, especially Windows 10. But, with something like upwards of 40 million lines of code, it’s understandable that things can go wrong.

If you found this article helpful, you might like these other TechJunkie tutorials:

Have you encountered the bug where you received a message saying your PC was managed by a non-existent organization? How did you resolve the issue on your Windows PC? Please tell us about it in a comment below!

You can configure Windows 10 to auto login and boot straight to the desktop without entering the user password. Here is how you can do it.

To log into a Windows 10 computer, you have to enter the user password every time. This helps protect your user account and files on the system from any unauthorized access. However, if you don’t like entering the login password every time, you can skip it entirely and boot directly to the desktop. This is especially useful for single-user systems where you are the only one who uses the system.

There are two ways to configure Windows 10 auto login. First, you can use the netplwiz tool. Second, you can use the Registry Editor to set up automatic login. Both of these methods work with local and Microsoft accounts.

Without any delay, let me show the steps to set up auto login in Windows 10 to login without entering a user password.

Windows 10 auto login with netplwiz

Netplwiz is an advanced user account management tool. Using netplwiz, you can set up Windows 10 auto login in just a couple of steps. Here’s how.

1. Open the Run window with the “Win + R” shortcut.
2. Type “netplwiz” and press Enter.
3. Select the user account in the “Users” tab.
4. Uncheck the “Users must enter a username and password to use this computer” checkbox.
5. Click on the “Apply” button.
6. Type the password twice and click “Ok”

That is it. With that, you’ve configured the automatic login process in Windows 10.

Detailed steps:

1. Search “netplwiz” in the start menu and click on the “Run as Administrator” option. You can also use the Run dialog box to open the Advanced User Accounts applet.

2. Select your user account under “Users for this computer” and uncheck the “Users must enter a username and password to use this computer” checkbox.

3. Click on the “Apply” button.

4. You will be prompted to enter the user account password. Type the password twice and click on the “Ok” button.

That is it. You’ve enabled Windows 10 auto login feature.

Disable auto login with netplwiz

To disable automatic login and enable password protection for your user account, open “netplwiz,” select the user account and check the “Users must enter a username and password to use this computer” option. Click the “Apply” button to save changes and restart the computer.

I cannot see the “Users must enter a username and password to use this computer” option.

Important: If you are using Windows 10 Hello feature like the pin, picture, face detection, or fingerprint authentication, you will not see the “Users must enter a username and password to use this computer” option in netplwiz. Disable Windows Hello to use auto login.

Windows 10 auto login with Registry

You can use the “AutoAdminLogon” registry key to set up automatic logon in Windows 10. Before making any changes, back up the registry.

1. Search for “regedit” in the start menu and open it.

2. Paste the below path in the address bar and press Enter.

3. Right-click on Winlogon folder and select “New → String Value.” Name the value as “DefaultUserName.” Double-click on the “DefaultUserName” value, type your username, and click “Ok.”

4. Right-click on the Winlogon folder again and select “New → String Value.” Name the value as “DefaultPassword.”

5. Double-click on the DefaultPassword value, enter the password in the Value Data field and click on the “Ok” button to save changes.

6. Right-click on the Winlogon folder and select “New → String Value.” Name the value as “AutoAdminLogon.” Double-click on the “AutoAdminLogon” value, type “1” in the Value Data field, and click “Ok.”

7. Close the registry editor and restart the system

From now on, Windows 10 will not ask for password and auto logins you to your desktop.

Disable auto login with registry

To disable Windows 10 auto login, go to the registry location and set the AutoAdminLogon to “0”. You can also delete the “DefaultPassword” value.

Important note: As good as the Windows 10 auto login feature is, enabling automatic login will lessen the security. This is because any user who has physical access to your system can boot into your user account without any restrictions. So, think twice before configuring auto-login.

Hope that helps. If you are stuck or need some help, comment below and I will try to help as much as possible.